Cardboard Standing Desk – The standing desk as we have called this ingenious tool to use on the bed or sofa comfortably the laptop or tablet, and can be extended to other uses as a mini desktop to perform tasks, it is extremely simple to perform. Join two sheets of 47 × 29 cm so that altogether only 2. Do the same with the pieces of 20 × 29 cm and with the sheets of 21x29x16 cm you must glue three joints of cardboard standing desk. At the end, you must keep two pieces of 47 × 29 cm, two of 20 × 29 cm, two of 21x29x16 and two of 7 × 29 cm. Spread the edges so that they are even.
Then we must make a few slots so that the pieces fit together. We took one of the boards of the table top and both legs of the table top. With a pencil, we mark 14.5 cm long and 2 cm from the edge. We make these same measurements on the legs cardboard standing desk and cut. Once ready we sand them. We do the same step with the lower table. Take the parts that must be attached and place hot silicone inside and attach them. Put a little more silicone in the corners to make it stronger. Now we will cut several boards of 1 × 29 cm to reinforce the top of the table.